Shipper/Receiver
3.
0 Keene, NH Keene, NH Full-time Full-time From $18 an hour From $18 an hour SHIPPER / RECEIVER The Shipper/Receiver is one member of the Keene Production Support Team with the common goal of shipping quality product, on time, while consistently reducing lead time and cost.
This individual's primary responsibilities, along with his teammates, are the receipt, inventory, and issuance of all parts, manufactured stock items, and tool room supplies; as well as the shipping of all products, both packaged and crated.
All unit and parts orders are picked, packaged or crated, and shipped via appropriate carrier.
Proper documentation is prepared according to established policies and procedures.
The Shipper/Receiver is a highly skilled manual role requiring attention to detail, critical thinking and adherence to established procedures.
As with all other roles within Tidland Keene, this individual must adhere to all documented safety and manufacturing policies and procedures, as well as be flexible enough to assist in other areas as business needs dictate.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
1.
Receive parts and miscellaneous purchase order items, verifying count and identity to Receiving Report.
Parts requiring inspection are delivered to the inspection area prior to verifying count, and returned for verification, if appropriate.
Parts not requiring inspection are visually checked for general condition.
Complete receiving paperwork and distribute per established procedures.
2.
Store parts according to assigned location, and label with appropriate identifying marks.
3.
Receive and verify Inventory Transfer (ITF) items and process as above.
4.
Select and prepare part numbered items and rubber tubing according to parts sales order.
Package and ship with identifying labels according to established procedures.
Complete and distribute proper paperwork.
5.
Paint, crate, label and ship shafts weighing up to 1000 lbs (forklift and cranes onsite).
Painting is performed in a paint booth with positive air exchange.
Crates are built to size for each shipment to conform with written procedures and export requirements.
6.
Verify counts and shipping methods to manifest daily.
7.
Maintain adequate supply of lumber and other shipping and packaging materials.
8.
Select and prepare parts and rubber tubing for shaft and accessory production according to material list.
Complete and distribute paperwork according to established procedures.
9.
Maintain inventory of part and non-part numbered items used in the manufacturing process.
10.
Maintain and issue finished goods inventory.
11.
Rotate stock as needed and inform supervisor of stagnant or obsolete items.
12.
Conduct pre-count and assist in periodic and annual physical inventory.
13.
Apply rust inhibitor to metallic parts to ensure proper working order.
14.
Operate secure stockroom at all times to maintain inventory control and to monitor reasonable usage of perishable items, reporting any excessive consumption to supervisor.
15.
Maintain neat and clean working area.
Inform supervisor of any equipment defects, including calibration of weighing and measuring equipment.
16.
Assist in other areas of manufacturing as required.
17.
Work in a safe manner at all times, following established policies and procedures.
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
1.
High school diploma or equivalent, with six months experience desired in a shipping, receiving, or stockroom setting.
2.
Carpentry framing skills required.
3.
Requires the understanding of shop mathematics together with engineering drawings, specifications, and various types of precision measuring instruments.
4.
Computer literacy and a working knowledge of Epicor systems is helpful.
5.
Requires the use of judgment to plan, perform and make decisions as to the sequence of operations and processes within the limitations of established or standard methods and procedures.
6.
Constant alertness and continuous mental and visual attention required to accurately and safely accomplish all tasks on a daily basis consistent with the shipping schedule.
7.
Auto paint experience helpful.
Job Type:
Full-time Pay:
From $18.
00 per hour Expected hours:
No less than 40 per week
Benefits:
401(k) 401(k) matching Dental insurance Disability insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Schedule:
8 hour shift Day shift Overtime Ability to Relocate:
Keene, NH 03431:
Relocate before starting work (Required) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
0 Keene, NH Keene, NH Full-time Full-time From $18 an hour From $18 an hour SHIPPER / RECEIVER The Shipper/Receiver is one member of the Keene Production Support Team with the common goal of shipping quality product, on time, while consistently reducing lead time and cost.
This individual's primary responsibilities, along with his teammates, are the receipt, inventory, and issuance of all parts, manufactured stock items, and tool room supplies; as well as the shipping of all products, both packaged and crated.
All unit and parts orders are picked, packaged or crated, and shipped via appropriate carrier.
Proper documentation is prepared according to established policies and procedures.
The Shipper/Receiver is a highly skilled manual role requiring attention to detail, critical thinking and adherence to established procedures.
As with all other roles within Tidland Keene, this individual must adhere to all documented safety and manufacturing policies and procedures, as well as be flexible enough to assist in other areas as business needs dictate.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
1.
Receive parts and miscellaneous purchase order items, verifying count and identity to Receiving Report.
Parts requiring inspection are delivered to the inspection area prior to verifying count, and returned for verification, if appropriate.
Parts not requiring inspection are visually checked for general condition.
Complete receiving paperwork and distribute per established procedures.
2.
Store parts according to assigned location, and label with appropriate identifying marks.
3.
Receive and verify Inventory Transfer (ITF) items and process as above.
4.
Select and prepare part numbered items and rubber tubing according to parts sales order.
Package and ship with identifying labels according to established procedures.
Complete and distribute proper paperwork.
5.
Paint, crate, label and ship shafts weighing up to 1000 lbs (forklift and cranes onsite).
Painting is performed in a paint booth with positive air exchange.
Crates are built to size for each shipment to conform with written procedures and export requirements.
6.
Verify counts and shipping methods to manifest daily.
7.
Maintain adequate supply of lumber and other shipping and packaging materials.
8.
Select and prepare parts and rubber tubing for shaft and accessory production according to material list.
Complete and distribute paperwork according to established procedures.
9.
Maintain inventory of part and non-part numbered items used in the manufacturing process.
10.
Maintain and issue finished goods inventory.
11.
Rotate stock as needed and inform supervisor of stagnant or obsolete items.
12.
Conduct pre-count and assist in periodic and annual physical inventory.
13.
Apply rust inhibitor to metallic parts to ensure proper working order.
14.
Operate secure stockroom at all times to maintain inventory control and to monitor reasonable usage of perishable items, reporting any excessive consumption to supervisor.
15.
Maintain neat and clean working area.
Inform supervisor of any equipment defects, including calibration of weighing and measuring equipment.
16.
Assist in other areas of manufacturing as required.
17.
Work in a safe manner at all times, following established policies and procedures.
QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
1.
High school diploma or equivalent, with six months experience desired in a shipping, receiving, or stockroom setting.
2.
Carpentry framing skills required.
3.
Requires the understanding of shop mathematics together with engineering drawings, specifications, and various types of precision measuring instruments.
4.
Computer literacy and a working knowledge of Epicor systems is helpful.
5.
Requires the use of judgment to plan, perform and make decisions as to the sequence of operations and processes within the limitations of established or standard methods and procedures.
6.
Constant alertness and continuous mental and visual attention required to accurately and safely accomplish all tasks on a daily basis consistent with the shipping schedule.
7.
Auto paint experience helpful.
Job Type:
Full-time Pay:
From $18.
00 per hour Expected hours:
No less than 40 per week
Benefits:
401(k) 401(k) matching Dental insurance Disability insurance Employee assistance program Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Schedule:
8 hour shift Day shift Overtime Ability to Relocate:
Keene, NH 03431:
Relocate before starting work (Required) Work Location:
In person.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
